You are here: Home » News » Excavator Bucket Teeth - How to Make Your Excavator More Efficient

Excavator Bucket Teeth - How to Make Your Excavator More Efficient

Views: 0     Author: Site Editor     Publish Time: 2022-11-11      Origin: Site

An excavator Teeth holder is an integral part of an excavator's front end bucket. As the front end of a bucket, it exerts huge changeable power. As such, the bucket tooth holder needs to be able to withstand a variety of loads. This includes axial, vertical, and lateral loads. Additionally, it must be able to withstand the impact force, twisting resistance, and vibration forces.

When a bucket tooth becomes worn or dull, it will reduce the efficiency of the excavator's bucket. This, in turn, will cause increased fuel consumption. In addition, dull teeth will cause increased percussive shock, which can damage equipment and accelerate the wear on other components of the excavator's undercarriage. Hence, it is important to ensure that teeth in the bucket are sharp and well-maintained.

It is important to regularly clean and oil excavator teeth to prevent breakage. The machine's technician may also check the teeth and replace them if necessary. Depending on the type of material the machine is made from, different teeth designs may have different advantages. Fortunately, new teeth for excavators are easy to obtain.When choosing a new excavator tooth, it is important to choose the correct size. The right size is essential for the type of job you are performing. A wide tooth will make it easier for you to dig a hole, but a narrow tooth will be less effective in digging up compacted ground. The teeth' design and construction are other factors to consider. Some are self-sharpening, while others may require re-sharpening.

The mounting system for an excavator bucket's digging tooth consists of a releasable connector and an adaptor nose with upper and lower bearing surfaces. In some prior art designs, the teeth are secured onto the lip of the bucket by frictional engagement, large pins, or aligned apertures. Some are even welded directly onto the lip of the bucket.

An excavator bucket's wear rate depends on the material it's made of and the type of construction environment it's working in. For example, if the excavator is working on sandy soil, it's best to replace the bucket teeth every two years. But if it's working on rock or granite, the bucket teeth should be replaced more often, at least once a week. The amount of wear and tear is also dependent on the quality of the bucket teeth and their design.To ensure the durability and efficiency of the bucket, you can also replace the worn-out teeth by rotating the excavator bucket teeth. This will improve your machine's efficiency and reduce maintenance costs. Just make sure that you don't dig too deep or too far and use the excavator in a straight line to avoid breaking the bucket teeth.

Teeth holder

Teeth holder

Excavator teeth

excavator bucket teeth



Copyright © Jiangmen Baorui Mechanical Engineering Co.,Ltd All rights reserved.| Sitemap